Roll-Line Wrench Kits

Roll-Line Wrench Kits to keep your Roll-line plates adjusted.

The Roll-Line Standard Wrench Kit - Entry Level tool kit

The 2 piece Variant Kit Includes:

1. 11mm/17mm Standard Wrench, 11mm for the Axle Nuts and 17mm for Action Adjustments
2. 5mm Allen L Wrench, for locking the Toe Stop into position

The Roll-Line Standard Pro 4 Wrench Tool Kit - Basic Level tool kit

The 4 wrench Kit Includes:

1. 11mm/17mm Tube Wrench, 11mm for the Axle Nuts and 17mm for Action Adjustments
2. 13mm Wrench, for Pivot Pin Jam Nuts Wrench 
3. 6mm Wrench, for adjusting the Pivot Pins 
4. 4mm Allen L Wrench, for the King Pin Locking (Keeper) Screws

** The Standard Professional 4 Wrench Tool Kit comes as the accessory Tool Kit with the Giotto, Ring, Spin, and Rafaello.

The Roll-Line Standard Pro 5 Tube Wrench Tool Kit - Mid Level tool kit

The 5 wrench Kit Includes:

1. 11mm/17mm Tube Wrench, 11mm for the Axle Nuts and 17mm for Action Adjustments
2. 13mm Wrench, for Pivot Pin Jam Nuts Wrench 
3. 6mm Wrench, for adjusting the Pivot Pins 
4. 4mm Allen L Wrench, for the King Pin Locking (Keeper) Screws
5. 5mm Allen L Wrench, for locking the Toe Stop into position

** The Standard Professional 5 Tube Wrench Tool Kit comes as the accessory Tool Kit with the Variant M and Blaster.

The Roll-Line Standard Pro 5 Flat Wrench Tool Kit - Mid Level tool kit

The 5 wrench Kit Includes:

1. 11mm/17mm Flat Wrench, 11mm for the Axle Nuts and 17mm for Non-Click Action Adjustments
2. 13mm Wrench, for Pivot Pin Jam Nuts Wrench 
3. 6mm Wrench, for adjusting the Pivot Pins 
4. 4mm Allen L Wrench, for the King Pin Locking (Keeper) Screws
5. 5mm Allen L Wrench, for locking the Toe Stop into position

** The Standard Professional 5 Flat Wrench Tool Kit comes as the accessory Tool Kit with the Variant M and Blaster

The Roll-Line Super Pro 6 Wrench Tool Kit - Top Level tool kit

The 6 wrench Kit Includes:

1. 11mm/17mm Tube Wrench, 11mm for the Axle Nuts and 17mm for Action Adjustments
2. 13mm Wrench, for Pivot Pin Jam Nuts Wrench 
3. 6mm Wrench, for adjusting the Pivot Pins 
4. 16mm Wrench, for removing the King Pins (not recommended if the King Pins are to be re-used)
5. 4mm Allen L Wrench, for the King Pin Locking (Keeper) Screws
6. 5mm Allen L Wrench, for locking the Toe Stop into position

** The Super Pro 6 Wrench Tool Kit comes as the accessory Tool Kit with the Dance, Evo, Energy Pro, Mistral, and Navigator.